PiTec substructure filter - basic filter, Maunawai

You don't need a separate - or 3-way tap!

The PiTec basic filter can be easily installed in the kitchen under your sink.

Basic filter

Ideal for removing the following impurities from the water:

  - Sand

  - Mud

  - Rust

  - Pollen

and other suspended solids

Flitration range: 1 μm

Our basic filter is provided with antibacterial protection. In case of contact with the protective surface, its propagation process is interrupted.

Usage: The basic filter should be after 10,000 liters or approx. 12 months to be changed. An earlier change may be necessary if the water flow is noticeably reduced.

Power: 5-8 liters/min, depending on water pressure

Connection: 3/8'' Will be connected directly to your cold water pipe. No additional fitting is needed.

You need for assembly:

  - additional flex connection hose 3/8'' IG x 3/8'' AG in necessary length. 
  - Teflon tape (threaded sealing tape)

Delivery contents:

  1.) Housing with basic filter
  2.) A set consisting of

     - 1x wall mount

     - 4x stainless steel screws for attaching the wall bracket to the housing

  3.) 1x housing key for opening/closing the housing

  4.) 2x 3/8'' double nipple (pre-assembled)

  5.) Assembly instructions

Dimensions: Filter unit without connections (WxHxD): 123 x 310 x 115 mm.

Weight: Completely dry approx. 2.4 kg; completely wet approx. 3.5 kg.

Change interval: 1-2 years
Depending on your water quality.

Note:

Only suitable for cold water operation, protect from frost!

Comparison PiTec undertable systems:

(*1)

• Sand
• Mud
• Cut
• Pollen

(*2)

• Smell and bad taste in water
• Microparticles
• Chlorine and similar unwanted substances
• Various heavy metals like lead etc.
• Organic compounds
• Pesticides, herbicides
• Hormones and drug residues